AUTOMATIC PAPER RONDO TRAY AND PVC TRAY AMPOULE PACKING MACHINE

AUTOMATIC AMPOULE RONDO TRAYS PACKING MACHINE

SUITABLE FOR “C” & “I” TYPE PAPERS TRAYS

PUTTING INTO OPERATION

 Basic units consist of a rondo tray hopper, a denesting station, a product hopper, a rotary filling stations, an inserting wheel, and controls switches.

The machine should be used for Ampoules to be packed in rondo trays for which it has been fitted with.

The nested trays are placed directly in the rondo tray hopper in the same position as received from the suppliers. Filled and labeled ampoules are placed in the product hopper in vertical position.

Now, operate the machine for a short time, by pressing inching Push Button with a view to obtain uniform packing of ampoules in to rondo trays..

The dog chain moves out each pair of nested rondos and transfers them to the denesting station where they are separated and positioned face up.

The chain further transfers these trays under the rotary filling station.

the rotary transfer wheel picks up a preselected number of ampoules and drops them in the rondo flutes.

The ampoules next are firmly inserted in to the flutes of the rondo by means of the inserting wheel.

Direction Of The Operation Will Be Left To Right.

Machine occupies very little floor space as compare to hand packing.

Very simple in operation. Size changes take less than fifteen minutes and require no special tools.

Machines efficiency allows short runs and frequent changes.

If ampoules placement found satisfactory, the machine is put into operation.

Now push green push button for continuous operations.

 Size of Ampoules

The machine used to pack Ampoules from 10mm to 17mmin diameter in to rondo trays in the horizontal position .

The height of the round Ampoules should be proportional to the diameter.  In the event of unusual height, kindly get the Ampoules examined at our works before putting the machine into operation.

Size of rondo trays.

The machine is suitable for following dimensions of the rondo trays.       

Change parts

The machine is fitted with the change-parts suitable for any one size of Ampoules as per the order and samples tried out.

The machine can be pre-set for the different size of Ampoules and rondos trays with change-parts.

the changes in star wheel depends on change in ampoules diameters, changes in numbers of fills per rondo or changes in rondo dimensions