Viesearch - The Human-curated Search Engine

Automatic Ampoule External Washing Machine

Automatic Ampoule External Washing Machine

Automatic External ampoule Washing Machine: Model AEEW 250 is designed to wash the outer surface of round shaped ampoule (1 ml to 10 ml ampoule) This machine washes the outer sides of ampoule and eliminates the particles that are formed on the ampoule, which are previously filled and sealed.

ampoule external washer machine is for oncology ampoule external washer machine and aseptic processing lines, speed up to 250apm , ampoule surfaces involves the destruction or removal of any possible product residual so as to prevent them infecting the operators and cross contamination between containers and machine, as well.

From the infeed hopper the ampoule are fed into the External ampoule Washing Machine starwheel. The machine consists of starwheel on which the ampoule are properly fed and transported from in feed hopper for the washing operation. Two operations are carried out on this machine. First the ampoule are washed by water jet and then dried by air jet. On the sides of the conveyor a set of spray nozzles are fitted on each conveyor for water jet. One set of knifes blocks are provided on each conveyor for air jet The air is sprayed through this knifes.

The Knifes are fitted in a inclined manner which ensures that the air that is sprayed reaches each corner of the vial which are previously washed. After washing and drying the vials are guided to the outfeed trays. Before reaching the outfeed Trays a special arrangement is provided to dry the ampoule from the bottom side.

A set of syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of the vial resulting in the drying of the ampoule. This machine is completely operated by PLC. A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water & air and shows the indication with alarm in the PLC.

  • Infeed hopper.
  • Imported Gear Motor for main drive, 
  • A.C. Frequency Drive for main drive, 
  • “No Vial – No Washing” system.
  • Acrylic Cabinet for machine.
  • Total cGMP model.
  • S.S frame structure.
  • Can handle vial sizes from 5ml to 100ml with the help of Change Parts.
  • “No ampoule – No Washing” system eliminates wastage of water & air.
  • Easy cleaning & maintaining.
  • Machine can be equipped with PLC system optionally.
  • Normal water required for washing. No hot water required.
  • Pneumatic Air: Filtered, oil free, sterile low-pressure Air at 5kg/cm (4/6 bar) 150 CFM.
  • Water supply: 120 litre/ hour (approx.)
  • Note: You can reuse the drain DM water which is used in the Vial Washing Machine.
  • 1ml to 10ml vial (Dia. 10mm to 18 mm max.)
  • Height: 38 mm to 160 mm
Model No. AEEW 250
Direction Left to Right
Production Rate Up to 200 ampoules/ min
Electrical Supply 440 Volts 3 Phase 50/60 Hz (5 wire)
Power Requirement 2 HP
Height of Conveyor 900mm (approx.)
Dimensions 1800mm (L) X 1200mm (W) X 1200mm (H)
Net Weight 550 kgs. (approx.)
Gross Weight 1211 kgs. (approx.)

* Specification can be changed as per customers’ requirements